SKU: 50279769402
Ships within 48 hours · Estimated delivery Sep 2 - Sep 7
The MP6500 also features an open-drain FAULT output that drives low whenever the H-bridge FETs are disabled as the result of over-current protection
including the high-power (HP) versions
You will typically want to set the driver’s current limit to be at or below the current rating of your stepper motor
the shield supports jumper wires for rapid prototyping
6mA Input Impedance 1MegaOhm Recommended Max Difference between Vin+ and Vin- 30V Absolute Maximum difference between Vin+ and Vin- 35V CMR inputs 40V Output Range 0 to 5V Min/Max errors ±2% Typical Error ±0
250:1 Metal Gearmotor 20Dx46L mm 6V CB with Extended Motor Shaft Category_Boards/Real Time Clock (RTC) The MP6500 also features anThese small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long life carbon brushes combined with a 250: 1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox. This version also has a 6 2 mm extended motor shaft . Key specifications: voltage no load performance stall
US$ 10.00
US$ 15.00
US$ 12.50
US$ 30.00
US$ 25.00
US$ 25.00
US$ 20.00
US$ 15.00
US$ 55.00
US$ 20.00
US$ 20.00
US$ 75.00
US$ 20.00
US$ 35.00
US$ 37.50
US$ 10.00
US$ 20.00
US$ 10.00
US$ 20.00
US$ 45.00
